Treaty-Based Impact Assessment

An unauthorised entry of a vehicle into a restricted or controlled work zone on a job site. Subcontractors are often held liable if their equipment or drivers breach designated exclusion areas. Incursions can trigger incident reports, work stoppages, and contract penalties.

A pre-dig service that identifies and marks underground utilities before excavation begins. Subcontractors are typically required to obtain a locate before breaking ground. Failure to do so can result in liability for damages, project shutdowns, or regulatory fines.

A PFAS (Personal Fall Arrest System) is safety equipment that stops a worker from hitting the ground during a fall. It typically includes a full-body harness, lanyard, and anchor point. Subcontractors must ensure PFAS equipment is inspected, certified, and meets provincial and federal regulations before workers go at height.

The practice of properly restraining equipment, materials, and tools on vehicles during transport to prevent shifting or falling. Subcontractors are legally responsible for securing their own loads under provincial and federal transport regulations. Non-compliance can result in fines, licence suspensions, or liability for road incidents.

A numerical score calculated by insurers that compares your company's workplace injury claims to industry averages. A score below 1.0 indicates a safer-than-average record; above 1.0 signals higher risk. Many prime contractors and operators require subcontractors to maintain a low EMR to qualify for bid lists.

A U.S.-based advocacy network pushing for stronger worker safety standards across industries, including oil and gas and construction. Subcontractors should monitor their policy campaigns, as recommendations often influence OSHA regulations affecting field operations. Their resources can help companies identify emerging compliance risks before they become enforceable requirements.

When a Jobsite Incident Happens: What Field Workers Need to Know Before Signing Anything

What to do after a jobsite injury or incident, what your rights are before signing incident reports, how workers' compensation works, and how to protect yourself on multi-employer worksites.

OSHA Citations on Multi-Employer Worksites: What Subcontractors Need to Know

Learn how OSHA's multi-employer citation policy works, why subcontractors get cited for hazards they didn't create, and how to protect your company on operator-controlled job sites.

How to Read and Negotiate an Oilfield Master Service Agreement (MSA): A Subcontractor's Guide

Learn which MSA clauses actually matter for oilfield subcontractors: indemnity, insurance, payment terms, and change orders. Know what you're signing.