Egress

A federal and provincial regulatory structure capping greenhouse gas emissions from oilsands operations. Subcontractors may face new equipment standards, fuel restrictions, or reporting requirements on-site. Clients may pass compliance costs or operational constraints down through contracts.

The process of identifying and marking underground utilities before excavation begins. Subcontractors are often required to confirm locates are valid before breaking ground. Failure to comply can result in strikes, liability, and work stoppages.

A regulatory requirement mandating that subcontractors implement heat safety protocols for outdoor and high-temperature worksites. It typically covers acclimatisation procedures, water access, rest breaks, and emergency response plans. Non-compliance can result in stop-work orders, fines, or disqualification from site.

A formal directive halting all or part of a worksite operation due to a safety, contractual, or regulatory concern. Subcontractors must comply immediately, regardless of who issues it. Downtime caused by a stop-work order may affect billing, crew scheduling, and contract timelines.

A documented, step-by-step plan for isolating hazardous energy before subcontractors perform maintenance or service work. It outlines lockout/tagout steps specific to each piece of equipment on site. Subcontractors are typically required to follow or develop their own procedure that meets the site owner's standards.

A regulatory approval authorizing a pipeline or facility to proceed to physical construction. Subcontractors cannot mobilise crews or begin ground disturbance until this permit is granted. Delays in approval directly impact project start dates and subcontractor scheduling.

When a Jobsite Incident Happens: What Field Workers Need to Know Before Signing Anything

What to do after a jobsite injury or incident, what your rights are before signing incident reports, how workers' compensation works, and how to protect yourself on multi-employer worksites.

OSHA Citations on Multi-Employer Worksites: What Subcontractors Need to Know

Learn how OSHA's multi-employer citation policy works, why subcontractors get cited for hazards they didn't create, and how to protect your company on operator-controlled job sites.

How to Read and Negotiate an Oilfield Master Service Agreement (MSA): A Subcontractor's Guide

Learn which MSA clauses actually matter for oilfield subcontractors: indemnity, insurance, payment terms, and change orders. Know what you're signing.