FieldNews
Subscribe

Daily oil & gas and construction news for subcontractors

WorkforceTexas2 min read

Six Fatigue Controls for Long Hitches, From Texas City to the Drive Home

A Shale Magazine guest feature draws on CSB, NIOSH and HSE findings to outline six fatigue controls for well-site, hauling and pipeline crews, from shift limits to journey management.

FieldNews Staff|

Six Fatigue Controls for Long Hitches, From Texas City to the Drive Home

Some BP Texas City operators worked 12-hour shifts for as many as 29 consecutive days before the 2005 explosion that killed 15 people, and the US Chemical Safety Board concluded they were likely fatigued. A guest feature in Shale Magazine uses that record to set out six controls for crews on long hitches: schedule limits, protected sleep, fit-for-work checks, task planning, journey management and near-miss learning.

The author notes the CSBโ€™s 2013 draft evaluation of API RP 755. APIโ€™s own technical report linked more than five consecutive 12-hour days, or more than 60 hours a week, to reduced safety. Yet the RP allowed seven consecutive 12-hour days in normal operations and 14 during outages. On the road, NIOSH says motor vehicle crashes are the leading cause of death in US oil and gas extraction. One NIOSH case involved three workers starting a 10-hour drive after a 20-hour shift. The driver fell asleep about 25 miles in, and two of the three died.

What It Means for Subcontractors

  • Hauling, pipeline and wellsite drivers: Write journey management into the trip plan. The article calls for rest before any long drive after a long shift, shared driving or overnight lodging when rest isnโ€™t possible, seat belts every time, and an arrival check-in.
  • Rig and wellsite supervisors: Add two questions to the pre-shift toolbox talk: hours slept in the last 24 and hours awake now. Schedule line breaks, heavy lifts and complex start-up steps outside early-morning night-shift hours. Where that isnโ€™t possible, add an independent check on the critical steps.
  • Safety managers and estimators: Compare your rosters to the five-consecutive-12s and 60-hour benchmarks before the next bid package. The article doesnโ€™t address owner prequalification. But HSEโ€™s advice for a written policy on hours, overtime and shift-swapping, backed by records, gives you documentation to answer safety questionnaires. Rising overtime in those records usually signals a staffing gap, not a scheduling one.

Get The Field Report

The week in oil & gas and heavy construction: market data, the big story, and where the work is. Every Sunday, in 60 seconds.

Your regions (up to 3)

Free, no spam, unsubscribe anytime.

๐Ÿ“˜

Want the full picture?

How Rig Count Trends Affect Subcontractor Demand and What to Do About It

Rig counts are the earliest signal of where field service work is heading. Learn how to read drilling activity trends, anticipate demand shifts, and position your crew before the phone stops ringing.

Read the guide โ†’

More from Texas

All coverage โ†’
Follow FieldNews
A community project byAimsio