10 Cfr Part 50

Temporary structural support used to stabilise trenches, excavations, or structures during construction or maintenance work. Subcontractors are often responsible for installing and inspecting these systems before crew entry. Proper shoring is a regulatory requirement under occupational health and safety codes.

A legal principle that assigns fault percentages to each party involved in an incident or loss. If a subcontractor is found partially at fault, their compensation can be reduced by their share of blame. Understanding this protects subcontractors from absorbing disproportionate liability on shared job sites.

A trained worker stationed outside a permit-required confined space to monitor entrants and conditions. They maintain communication with the entry team and initiate rescue procedures if hazards arise. Subcontractors must supply a qualified attendant or face work stoppages and liability on site.

A global standards organisation that sets codes for pressure vessels, piping, and mechanical equipment used on job sites. Subcontractors working on boilers, pressure systems, or lifting equipment often must meet ASME standards to qualify for contracts. Non-compliance can trigger failed inspections, work stoppages, or liability exposure.

A workplace danger where a worker's body or clothing becomes trapped, pinched, or pulled into moving machinery, equipment, or materials — common on oilfield and construction sites where subcontractor crews work near rotating equipment, conveyor systems, or heavy moving loads. Subcontractors are responsible for identifying and controlling these hazards through proper guarding, lockout/tagout procedures, and site-specific hazard assessments before work begins.

The process of controlling airborne particulates on worksites using water trucks, chemical agents, or barriers. Subcontractors may be contractually responsible for dust suppression on access roads, laydown yards, or excavation sites. Failure to comply can result in stop-work orders or back-charges from the prime contractor.

When a Jobsite Incident Happens: What Field Workers Need to Know Before Signing Anything

What to do after a jobsite injury or incident, what your rights are before signing incident reports, how workers' compensation works, and how to protect yourself on multi-employer worksites.

OSHA Citations on Multi-Employer Worksites: What Subcontractors Need to Know

Learn how OSHA's multi-employer citation policy works, why subcontractors get cited for hazards they didn't create, and how to protect your company on operator-controlled job sites.

How to Read and Negotiate an Oilfield Master Service Agreement (MSA): A Subcontractor's Guide

Learn which MSA clauses actually matter for oilfield subcontractors: indemnity, insurance, payment terms, and change orders. Know what you're signing.