A documented safety plan addressing heat stress and cold exposure risks for workers in outdoor or industrial environments. Subcontractors may be required to submit a TRIIPP before mobilising crews to remote or extreme-climate worksites. It typically outlines monitoring procedures, acclimatisation schedules, and emergency response protocols.
TRIIPP (Temperature-related Injury and Illness Prevention Plan)
Related Terms
Nfpa 70b (national Fire Protection Association Recommended Practice for Electrical Equipment Maintenance)
ComplianceA U.S. standard outlining inspection, testing, and maintenance requirements for electrical systems and equipment. Field service contractors performing electrical maintenance work may be required to follow NFPA 70B procedures on job sites. Compliance demonstrates due diligence and is often specified in client scopes of work.
Hazard Assessment
ComplianceA formal process where subcontractors identify and evaluate site-specific risks before work begins. It documents potential dangers, required controls, and responsible parties. Most client operators require a completed hazard assessment before issuing a work permit.
Federal Register
ComplianceThe official daily journal of the U.S. federal government, publishing new regulations, rule changes, and compliance requirements. Subcontractors working on U.S. projects must monitor it for updates affecting labour, safety, and environmental obligations.
Nfpa 70e (national Fire Protection Association 70e Standard for Electrical Safety in the Workplace)
ComplianceA U.S. standard governing electrical safety practices, PPE requirements, and arc flash hazard protocols on job sites. Subcontractors working on energised electrical systems must comply to meet site access and insurance requirements. Canadian contractors often encounter it on cross-border projects or with American general contractors.
Cease-And-Desist Order
ComplianceA legal directive requiring a subcontractor to immediately stop a specific activity, such as work on a contested site or allegedly unsafe operations. Violating the order can result in fines, contract termination, or legal liability. Field crews must halt the named activity until the order is legally resolved or lifted.
Protective Systems
ComplianceEngineered controls used to prevent cave-ins, collapses, or hazardous exposures at excavation and confined space sites, including shoring, trench boxes, sloping, and shielding. Required by regulation on any excavation deeper than 1.2 metres. Subcontractors are typically responsible for selecting and installing the correct system before workers enter.
Latest Compliance News
Better Incident Debrief Questions Than "What Were You Thinking?"
A safety column in ISHN argues supervisors should ask why a shortcut made sense to the crew, not just who broke a rule. Here are the debrief questions it recommends.
yesterdayComplianceOntario Steel Fabricator Fined $50,000 After Conveyor Collapse
Essex Weld Solutions Ltd. pleaded guilty and was fined $50,000 after a conveyor collapsed on a worker at its Leamington, Ont., facility. Ministry investigators found the equipment was not blocked against tipping.
5 days agoComplianceTwo Workers Killed When Car Enters Fenced Pickering Jobsite
A 58-year-old man and a 21-year-old woman died after a car struck them inside a fenced construction site at the Shops at Pickering City Centre on Nov. 13. Police say the cause remains under investigation.
6 days agoComplianceLadder Safety Built for a "Default" Worker Raises Fall Risk, Journal Says
A November 2026 Professional Safety Journal article argues that ladder programs should fit the worker through ergonomic selection, capability-based training and properly fitted PPE. It focuses on women on construction crews, but the principles apply to any worker outside traditional design assumptions.
8 days agoRelated Guides
When a Jobsite Incident Happens: What Field Workers Need to Know Before Signing Anything
What to do after a jobsite injury or incident, what your rights are before signing incident reports, how workers' compensation works, and how to protect yourself on multi-employer worksites.
Compliance GuideOSHA Citations on Multi-Employer Worksites: What Subcontractors Need to Know
Learn how OSHA's multi-employer citation policy works, why subcontractors get cited for hazards they didn't create, and how to protect your company on operator-controlled job sites.
Compliance GuideHow to Read and Negotiate an Oilfield Master Service Agreement (MSA): A Subcontractor's Guide
Learn which MSA clauses actually matter for oilfield subcontractors: indemnity, insurance, payment terms, and change orders. Know what you're signing.
Stay sharp on field operations
Industry news and insights, delivered to your inbox.
Subscribe to FieldNews
