Ontario Steel Fabricator Fined $50,000 After Conveyor Collapse
Essex Weld Solutions Ltd., a steel fabrication and assembly company, has been fined $50,000 over a March 2025 incident that critically injured a worker at its Leamington, Ont., facility, according to the Daily Commercial News. On March 17, 2025, a supervisor told the worker to adjust a mobile roller conveyor made up of four bolted-together sections. The shop routinely reconfigured the conveyor for different orders, and each section weighed about 430 pounds.
Working alone, the worker loosened bolts on the brackets of a middle section, and the conveyor collapsed. The Ministry of Labour, Immigration, Training and Skills Development found the conveyor had not been securely blocked to prevent tipping during maintenance. The company pleaded guilty in Windsor Provincial Offences Court on Sept. 25, 2026, and Justice of the Peace Susan Whelan imposed the fine.
What It Means for Subcontractors
- Fabrication and millwright crews: The ministryโs finding was about blocking, not a defect in the equipment. Any multi-section conveyor, rack or jig that gets unbolted during reconfiguration needs documented blocking or cribbing before the first bolt is loosened. Sections of roughly 430 pounds each are well past what one person can control once a joint lets go.
- Supervisors and shop leads: The injured worker was alone and acting on a supervisorโs instruction for a task the shop did routinely. Write a step-by-step procedure for each recurring reconfiguration job, name who verifies the blocking, and stop assigning those jobs to one person.
- Safety and prequalification staff: A guilty plea and a $50,000 fine are now on the public record for an Ontario fabricator. If you supply into Ontario jobsites, review your own routine maintenance and reconfiguration tasks before your next prequalification renewal, so your incident history and corrective actions are ready to show.


