A one-way valve or flap gate that allows water to drain freely but prevents backflow from rising tides or high water levels. Subcontractors working on coastal or waterfront sites must account for tide gate locations when planning drainage, excavation, or utility work. Ignoring these structures can cause flooding, schedule delays, and scope changes.
Tide Gate
Related Terms
Dual-Fuel System
IndustryAn engine or generator that runs on two fuel sources, typically diesel and natural gas, allowing switching based on availability or cost. Common on remote job sites where field crews manage fuel supply logistics. Subcontractors may need certified technicians and specific maintenance protocols to operate this equipment.
PSI (Pounds Per Square Inch)
IndustryA unit measuring pressure in pipelines, hydraulic systems, and wellhead equipment. Subcontractors must verify PSI ratings when selecting tools, hoses, and fittings for safe operation. Exceeding rated PSI limits can trigger equipment failure, injuries, and liability.
Tunnel Liner
IndustryA structural shell installed inside a bored tunnel to support surrounding soil or rock and maintain bore integrity. Subcontractors installing liners must meet strict tolerances and inspection hold points. Work is often sequenced tightly with boring crews, requiring close schedule coordination.
Raise Boring
IndustryA drilling method that creates vertical or inclined shafts by reaming upward from a pilot hole. Subcontractors use it for ventilation shafts, ore passes, and utility corridors. It requires specialised rigs and certified crews, affecting your equipment and labour bids.
Deepwater Export Terminal
IndustryAn offshore facility in deep water where oil or gas is transferred from production infrastructure to tankers or pipelines for transport. For subcontractors, these sites require specialised marine certifications and offshore safety training. Mobilisation costs are high, so confirm day-rate structures and expense recovery terms before committing crews.
Tunnel Portal
IndustryThe open entrance and exit points of a tunnel where underground meets surface operations. For subcontractors, portals are critical mobilisation zones for equipment, crews, and material staging. Access, congestion, and safety controls at portals directly affect your crew's productivity and schedule.
Latest Industry News
B.C.'s $286B Project Pipeline: Only $32.5B Is Under Construction
A Greater Vancouver Board of Trade review of 47 B.C. major projects finds just 11% of the roughly $286 billion in value is under construction. Labour availability between 2027 and 2030 is flagged as the key risk.
todayIndustryData Center Load Puts Long-Term Strain on Grid Spending
Global electricity demand is projected to rise by more than 10,000 TWh over ten years, and a Cornell study shows data center operators covered only 38% of related US grid costs.
todayIndustryWorley Wins Two-Year Field Construction Job at K+S Bethune Mine
Worley will run field construction for K+S's Compaction and Power Distribution project at the Bethune potash mine in Saskatchewan under a two-year contract covering structural, piping, mechanical, electrical and controls work.
todayIndustryAlabama Water Utility Settles $1.4M Arcadis Fee Fight Over Lake Purdy Dam
Central Alabama Water settled a $1.4 million fee dispute with Arcadis after Lake Purdy Dam work stopped with spillway walls partly demolished. Completion of the corrective work is still unconfirmed.
yesterdayRelated Guides
How Operator Mergers and Acquisitions Affect Your Subcontract Agreements
When operators merge, get acquired, or sell assets, subcontractor agreements are caught in the middle. Learn how M&A activity affects your MSA, payment terms, vendor status, and what to do before, during, and after a deal closes.
Industry GuideHow Rig Count Trends Affect Subcontractor Demand and What to Do About It
Rig counts are the earliest signal of where field service work is heading. Learn how to read drilling activity trends, anticipate demand shifts, and position your crew before the phone stops ringing.
Industry GuideWhat Is an AFE in Oil and Gas and How Does It Affect Subcontractor Payments?
An AFE (Authorization for Expenditure) controls every dollar spent on an oilfield project. Learn how it affects your billing, change orders, and cash flow as a subcontractor.
Stay sharp on field operations
Industry news and insights, delivered to your inbox.
Subscribe to FieldNews
