Powered Industrial Truck

Gas produced by decomposing waste in landfills, primarily methane and carbon dioxide. Subcontractors working near landfill sites must account for LFG (Landfill Gas) detection and ventilation requirements. Exposure risks and monitoring obligations affect site safety planning and PPE requirements.

OCS (Overhead Contact Systems) are electrified wire networks suspended above roadways or rail lines to power heavy equipment or vehicles. Subcontractors working near OCS must follow strict clearance protocols to avoid contact hazards. Awareness of OCS boundaries is essential for crane operators, rig movers, and elevated work crews.

A contract clause that transfers liability for losses, injuries, or damages between parties. Subcontractors are often required to indemnify the prime contractor or operator against third-party claims. Review these clauses carefully, as they can expose your company to costs beyond your scope of work.

The management of vehicle and pedestrian movement through active work zones on job sites or public roads. Subcontractors often must supply certified flaggers and signage as a condition of their scope. Failing to meet traffic control requirements can result in stop-work orders or lost contracts.

A blasting technique where explosives are loaded starting from the back of the borehole toward the opening. This reduces the risk of premature detonation during charging operations. Subcontractors must follow site-specific protocols, as improper loading sequences can trigger serious safety violations.

An unplanned event that did not result in injury or damage but had the potential to do so. Subcontractors are typically required to report near misses to the prime contractor or site owner. Failing to report can jeopardise your safety record and standing on site.

When a Jobsite Incident Happens: What Field Workers Need to Know Before Signing Anything

What to do after a jobsite injury or incident, what your rights are before signing incident reports, how workers' compensation works, and how to protect yourself on multi-employer worksites.

OSHA Citations on Multi-Employer Worksites: What Subcontractors Need to Know

Learn how OSHA's multi-employer citation policy works, why subcontractors get cited for hazards they didn't create, and how to protect your company on operator-controlled job sites.

How to Read and Negotiate an Oilfield Master Service Agreement (MSA): A Subcontractor's Guide

Learn which MSA clauses actually matter for oilfield subcontractors: indemnity, insurance, payment terms, and change orders. Know what you're signing.