Metering Calibration

A method used to protect workers from cave-ins during excavation work, including sloping, shoring, or trench boxes. Subcontractors are legally required to implement an adequate protective system before workers enter any trench deeper than 1.2 metres. Failure to comply can result in stop-work orders, fines, or loss of contract.

A struck-by hazard refers to any situation on a worksite where personnel risk injury from a moving object, such as swinging loads, dropped tools, vehicles, or pressurised line failures — a leading cause of fatality that subcontractors must identify and control in their site-specific hazard assessments and toolbox talks. For field service crews working around heavy equipment, cranes, or high-traffic laydown yards, recognising and mitigating struck-by risks is a core compliance obligation under provincial occupational health and safety legislation.

Water extracted from the ground alongside oil and gas during production. Subcontractors handling, transporting, or disposing of it must meet strict environmental regulations. Improper management can trigger fines and halt site operations.

A work-related injury or illness that meets specific criteria requiring formal logging under OSHA regulations, including cases involving days away from work, restricted duties, medical treatment beyond first aid, or loss of consciousness — a metric that directly affects a subcontractor's safety record and can impact their eligibility for future contracts with operators and prime contractors.

The controlled burning of excess natural gas at a wellsite or facility. Subcontractors working on-site must follow strict flaring protocols, as ignition hazards affect work permits and safety zones. Flaring activity can also trigger regulatory hold points that delay field operations.

The American National Standard for hand protection selection criteria. It gives subcontractors a structured method to match the right gloves to specific job hazards. Clients and prime contractors increasingly require documented compliance with this standard on worksites.

When a Jobsite Incident Happens: What Field Workers Need to Know Before Signing Anything

What to do after a jobsite injury or incident, what your rights are before signing incident reports, how workers' compensation works, and how to protect yourself on multi-employer worksites.

OSHA Citations on Multi-Employer Worksites: What Subcontractors Need to Know

Learn how OSHA's multi-employer citation policy works, why subcontractors get cited for hazards they didn't create, and how to protect your company on operator-controlled job sites.

How to Read and Negotiate an Oilfield Master Service Agreement (MSA): A Subcontractor's Guide

Learn which MSA clauses actually matter for oilfield subcontractors: indemnity, insurance, payment terms, and change orders. Know what you're signing.