Labour Law § 240 (scaffold Law)

A documented check of equipment or structures for visible damage, corrosion, or defects — completed without disassembly. Subcontractors are often required to perform or witness EVIs before mobilising equipment on site. Results are typically recorded on inspection forms tied to client or regulatory compliance packages.

The practice of properly restraining equipment, materials, and tools on vehicles during transport to prevent shifting or falling. Subcontractors are legally responsible for securing their own loads under provincial and federal transport regulations. Non-compliance can result in fines, licence suspensions, or liability for road incidents.

Testing method used to inspect welds, pipes, and structures for defects without damaging the material. Subcontractors performing NDE must hold recognised certifications such as CGSB or ASNT. Clients often require NDE sign-off before authorising progress payments or work acceptance.

A regulated programme requiring subcontractors to inspect equipment for fugitive emissions using specialised tools like optical gas imaging cameras. Findings must be documented and repaired within set timeframes under federal and provincial regulations. Field crews performing LDAR work often require specific training and certification to stay compliant on site.

A formal written authorisation required before performing any work that produces heat, sparks, or open flame on a job site. Subcontractors must obtain this permit before welding, cutting, or grinding near flammable materials. Site supervisors issue and sign off on these permits, and work must stop if conditions change.

The TRC regulates oil, gas, and pipeline operations in Texas. Subcontractors must meet TRC requirements for permits, well operations, and environmental compliance. Non-compliance can halt work and affect contractor eligibility on job sites.

When a Jobsite Incident Happens: What Field Workers Need to Know Before Signing Anything

What to do after a jobsite injury or incident, what your rights are before signing incident reports, how workers' compensation works, and how to protect yourself on multi-employer worksites.

OSHA Citations on Multi-Employer Worksites: What Subcontractors Need to Know

Learn how OSHA's multi-employer citation policy works, why subcontractors get cited for hazards they didn't create, and how to protect your company on operator-controlled job sites.

How to Read and Negotiate an Oilfield Master Service Agreement (MSA): A Subcontractor's Guide

Learn which MSA clauses actually matter for oilfield subcontractors: indemnity, insurance, payment terms, and change orders. Know what you're signing.