Highly mineralised, hot saltwater extracted from underground geothermal reservoirs during energy production. Subcontractors handling it must follow strict corrosion control and PPE protocols. Disposal and handling are heavily regulated due to its chemical content.
Geothermal Brine
Related Terms
OCTG (Oil Country Tubular Goods)
IndustrySteel pipe products used in drilling, casing, and completing oil and gas wells. Subcontractors handling, transporting, or installing OCTG must follow strict make-up torque and storage specs. Damage or improper handling can trigger costly liability claims against your crew.
EOR (Enhanced Oil Recovery)
IndustryA set of advanced extraction techniques—such as steam injection, chemical flooding, or CO2 injection—used to pull additional crude from mature or low-yield reservoirs, which drives demand for specialised field service crews, equipment operators, and maintenance contractors on long-term site assignments.
Rig Utilization
IndustryThe percentage of time a rig is actively working versus sitting idle. For subcontractors, high rig utilisation means steady billable hours and predictable revenue. Low utilisation signals contract gaps that strain cash flow and crew retention.
ERP (Enterprise Resource Planning)
IndustrySoftware that centralises a subcontractor's core business functions, including payroll, invoicing, procurement, and scheduling. It replaces disconnected spreadsheets and paper systems with a single source of operational data. Larger GCs and operators may require subcontractors to integrate with their ERP for work orders and payment processing.
Brent Crude
IndustryA globally traded North Sea oil benchmark used to set crude pricing contracts. When Brent prices rise or fall sharply, operators often adjust project budgets, affecting subcontractor work volumes and day rates. Monitoring Brent helps field service companies anticipate slowdowns or ramp-ups in awarded work.
VFD (Variable Frequency Drive)
IndustryAn electronic device that controls motor speed by adjusting electrical frequency, commonly found on pumps, compressors, and fans at oil and gas facilities. Subcontractors working near VFDs must follow strict electrical isolation and lockout/tagout procedures. Technicians servicing VFDs typically require specialised training and may need additional site certifications.
Latest Industry News
B.C.'s $286B Project Pipeline: Only $32.5B Is Under Construction
A Greater Vancouver Board of Trade review of 47 B.C. major projects finds just 11% of the roughly $286 billion in value is under construction. Labour availability between 2027 and 2030 is flagged as the key risk.
todayIndustryData Center Load Puts Long-Term Strain on Grid Spending
Global electricity demand is projected to rise by more than 10,000 TWh over ten years, and a Cornell study shows data center operators covered only 38% of related US grid costs.
todayIndustryWorley Wins Two-Year Field Construction Job at K+S Bethune Mine
Worley will run field construction for K+S's Compaction and Power Distribution project at the Bethune potash mine in Saskatchewan under a two-year contract covering structural, piping, mechanical, electrical and controls work.
todayIndustryAlabama Water Utility Settles $1.4M Arcadis Fee Fight Over Lake Purdy Dam
Central Alabama Water settled a $1.4 million fee dispute with Arcadis after Lake Purdy Dam work stopped with spillway walls partly demolished. Completion of the corrective work is still unconfirmed.
yesterdayRelated Guides
How Operator Mergers and Acquisitions Affect Your Subcontract Agreements
When operators merge, get acquired, or sell assets, subcontractor agreements are caught in the middle. Learn how M&A activity affects your MSA, payment terms, vendor status, and what to do before, during, and after a deal closes.
Industry GuideHow Rig Count Trends Affect Subcontractor Demand and What to Do About It
Rig counts are the earliest signal of where field service work is heading. Learn how to read drilling activity trends, anticipate demand shifts, and position your crew before the phone stops ringing.
Industry GuideWhat Is an AFE in Oil and Gas and How Does It Affect Subcontractor Payments?
An AFE (Authorization for Expenditure) controls every dollar spent on an oilfield project. Learn how it affects your billing, change orders, and cash flow as a subcontractor.
Stay sharp on field operations
Industry news and insights, delivered to your inbox.
Subscribe to FieldNews
