A documented, step-by-step plan for isolating hazardous energy before subcontractors perform maintenance or service work. It outlines lockout/tagout steps specific to each piece of equipment on site. Subcontractors are typically required to follow or develop their own procedure that meets the site owner's standards.
Energy Control Procedure
Related Terms
Private Utility
ComplianceA utility line owned and maintained by a private company or landowner, not a public provider. These lines may not appear on municipal locate requests, creating hidden strike risks. Subcontractors must request owner-supplied records before any ground disturbance.
AER (Alberta Energy Regulator)
ComplianceAlberta's provincial body that regulates oil, gas, and coal development. Subcontractors must meet AER compliance requirements to work on regulated sites. Non-compliance can result in work stoppages or contract disqualification.
Zoning Challenge
ComplianceA dispute or regulatory hurdle when a worksite's land-use designation restricts certain field operations or equipment staging. Subcontractors may face delays, permit denials, or added costs until zoning is resolved. Always confirm zoning status before mobilising crews or equipment.
Environmental Baseline
ComplianceA documented record of environmental conditions at a site before work begins. Subcontractors may be required to contribute data or sign off on baseline surveys prior to mobilisation. It protects your company if environmental damage claims arise later.
Tunnel Ventilation
ComplianceA system that controls airflow in enclosed underground worksites to remove hazardous gases, dust, and fumes. Subcontractors must verify ventilation meets regulatory standards before crews enter. Inadequate ventilation can trigger work stoppages and liability for prime contractors.
EPRI (Electric Power Research Institute)
ComplianceA U.S.-based non-profit that develops technical standards and research for the electric power industry. Subcontractors working on utility or power infrastructure projects may need to follow EPRI guidelines for equipment and installations. Their published standards can affect inspection, testing, and compliance requirements on job sites.
Latest Compliance News
Better Incident Debrief Questions Than "What Were You Thinking?"
A safety column in ISHN argues supervisors should ask why a shortcut made sense to the crew, not just who broke a rule. Here are the debrief questions it recommends.
yesterdayComplianceOntario Steel Fabricator Fined $50,000 After Conveyor Collapse
Essex Weld Solutions Ltd. pleaded guilty and was fined $50,000 after a conveyor collapsed on a worker at its Leamington, Ont., facility. Ministry investigators found the equipment was not blocked against tipping.
5 days agoComplianceTwo Workers Killed When Car Enters Fenced Pickering Jobsite
A 58-year-old man and a 21-year-old woman died after a car struck them inside a fenced construction site at the Shops at Pickering City Centre on Nov. 13. Police say the cause remains under investigation.
6 days agoComplianceLadder Safety Built for a "Default" Worker Raises Fall Risk, Journal Says
A November 2026 Professional Safety Journal article argues that ladder programs should fit the worker through ergonomic selection, capability-based training and properly fitted PPE. It focuses on women on construction crews, but the principles apply to any worker outside traditional design assumptions.
8 days agoRelated Guides
When a Jobsite Incident Happens: What Field Workers Need to Know Before Signing Anything
What to do after a jobsite injury or incident, what your rights are before signing incident reports, how workers' compensation works, and how to protect yourself on multi-employer worksites.
Compliance GuideOSHA Citations on Multi-Employer Worksites: What Subcontractors Need to Know
Learn how OSHA's multi-employer citation policy works, why subcontractors get cited for hazards they didn't create, and how to protect your company on operator-controlled job sites.
Compliance GuideHow to Read and Negotiate an Oilfield Master Service Agreement (MSA): A Subcontractor's Guide
Learn which MSA clauses actually matter for oilfield subcontractors: indemnity, insurance, payment terms, and change orders. Know what you're signing.
Stay sharp on field operations
Industry news and insights, delivered to your inbox.
Subscribe to FieldNews
