The process of controlling airborne particulates on worksites using water trucks, chemical agents, or barriers. Subcontractors may be contractually responsible for dust suppression on access roads, laydown yards, or excavation sites. Failure to comply can result in stop-work orders or back-charges from the prime contractor.
Dust Suppression
Related Terms
PAPR (Powered Air-purifying Respirator)
ComplianceA battery-powered respirator that uses a blower to push contaminated air through filters before the worker breathes it. Subcontractors working in refineries, confined spaces, or around hazardous chemicals are often required to supply their own PAPR units. Fit-testing and training records must be maintained to meet occupational health regulations on site.
Environmental Review
ComplianceA formal assessment required before mobilising to site, confirming your work scope meets environmental regulations. Subcontractors may need to submit documentation or hold specific certifications to pass. Delays in approval can push your start date and affect project cash flow.
HIPP (Heat Illness Prevention Plan)
ComplianceA written programme subcontractors must have in place to protect workers from heat-related illness on outdoor or high-temperature job sites. It outlines hydration protocols, rest schedules, and emergency response procedures. Many prime contractors require a current HIPP before mobilisation is approved.
CSB (Chemical Safety Board)
ComplianceA U.S. federal agency that investigates industrial chemical accidents and releases public safety findings. Subcontractors working on cross-border or U.S.-linked projects should monitor CSB reports for lessons learned. Their incident findings often influence Canadian safety standards and client HSE requirements.
CLA (Combined Licence Application)
ComplianceA single regulatory submission that covers both construction permit and operating licence for a facility, such as a nuclear plant. Subcontractors may face extended pre-qualification and compliance requirements tied to the CLA approval timeline. Work scopes and mobilisation dates are often contingent on CLA milestones.
Safety-Critical Roles
CompliancePositions where errors or unqualified personnel can directly cause injury, fatality, or major incident on a worksite. Common examples include H2S monitors, crane operators, and confined space attendants. Subcontractors must verify certifications and competency before placing workers in these roles.
Latest Compliance News
Better Incident Debrief Questions Than "What Were You Thinking?"
A safety column in ISHN argues supervisors should ask why a shortcut made sense to the crew, not just who broke a rule. Here are the debrief questions it recommends.
yesterdayComplianceOntario Steel Fabricator Fined $50,000 After Conveyor Collapse
Essex Weld Solutions Ltd. pleaded guilty and was fined $50,000 after a conveyor collapsed on a worker at its Leamington, Ont., facility. Ministry investigators found the equipment was not blocked against tipping.
5 days agoComplianceTwo Workers Killed When Car Enters Fenced Pickering Jobsite
A 58-year-old man and a 21-year-old woman died after a car struck them inside a fenced construction site at the Shops at Pickering City Centre on Nov. 13. Police say the cause remains under investigation.
6 days agoComplianceLadder Safety Built for a "Default" Worker Raises Fall Risk, Journal Says
A November 2026 Professional Safety Journal article argues that ladder programs should fit the worker through ergonomic selection, capability-based training and properly fitted PPE. It focuses on women on construction crews, but the principles apply to any worker outside traditional design assumptions.
8 days agoRelated Guides
When a Jobsite Incident Happens: What Field Workers Need to Know Before Signing Anything
What to do after a jobsite injury or incident, what your rights are before signing incident reports, how workers' compensation works, and how to protect yourself on multi-employer worksites.
Compliance GuideOSHA Citations on Multi-Employer Worksites: What Subcontractors Need to Know
Learn how OSHA's multi-employer citation policy works, why subcontractors get cited for hazards they didn't create, and how to protect your company on operator-controlled job sites.
Compliance GuideHow to Read and Negotiate an Oilfield Master Service Agreement (MSA): A Subcontractor's Guide
Learn which MSA clauses actually matter for oilfield subcontractors: indemnity, insurance, payment terms, and change orders. Know what you're signing.
Stay sharp on field operations
Industry news and insights, delivered to your inbox.
Subscribe to FieldNews
