FieldNews
Subscribe

Daily oil & gas and construction news for subcontractors

ComplianceGlossary Term

Caught-In Hazard

A workplace danger where a worker's body or clothing becomes trapped, pinched, or pulled into moving machinery, equipment, or materials — common on oilfield and construction sites where subcontractor crews work near rotating equipment, conveyor systems, or heavy moving loads. Subcontractors are responsible for identifying and controlling these hazards through proper guarding, lockout/tagout procedures, and site-specific hazard assessments before work begins.

Related Terms

Respirator Fit Test

Compliance

A mandatory procedure confirming a respirator creates a proper seal on a worker's face before entering hazardous atmospheres. Subcontractors must ensure workers hold valid fit test records before mobilising to sites requiring respiratory protection. Most operators require annual recertification, and expired records can result in workers being turned away at the gate.

Fall Protection Program

Compliance

A documented safety plan required when workers are exposed to fall hazards above 3 metres. It outlines equipment requirements, inspection procedures, and worker training obligations. Subcontractors are typically responsible for maintaining their own compliant program on site.

Medium-Voltage

Compliance

Electrical systems operating between 1 kV and 35 kV, commonly found on industrial sites and oil and gas facilities. Subcontractors working near MV equipment typically require specialised certifications and strict site safety compliance. Always confirm voltage classifications before mobilising electrical crews.

Local Content Requirement

Compliance

A contractual or regulatory rule requiring subcontractors to hire local workers, source materials locally, or partner with regional firms. Non-compliance can disqualify you from bidding or trigger contract penalties. Common on projects funded by governments or national oil companies.

Api 653

Compliance

API 653 (American Petroleum Institute Standard 653) governs the inspection, repair, alteration, and reconstruction of above-ground storage tanks. Subcontractors performing tank work must comply with this standard or risk failed inspections and contract penalties. Many operators require certified API 653 inspectors on-site before authorising any tank maintenance scope.

Reactive Hazard

Compliance

A substance or condition that can cause fire, explosion, or violent reaction when exposed to heat, air, water, or other chemicals. Subcontractors must identify these hazards during site orientations and follow the operator's safe handling procedures. Failure to do so can trigger immediate work stoppages or removal from site.

Stay sharp on field operations

Industry news and insights, delivered to your inbox.

Subscribe to FieldNews
A community project byAimsio