29 Cfr 1926 Subpart U

A fall-arrest assembly attached to a fixed ladder, typically including a rail or cable that a climber's harness connects to. Required on ladders exceeding specified heights at most oil and gas and construction sites. Subcontractors must verify worker training and compatible harness equipment before mobilising to sites with these systems.

A government or operator-imposed halt on specific activities, such as drilling or fracking, in a region. For subcontractors, this means work orders stop and contracts may be suspended without pay. Always review force majeure clauses before mobilising to areas under active moratorium discussions.

An emissions control device fitted to diesel-powered equipment that traps soot and particulate matter from exhaust. Subcontractors must ensure DPFs are maintained and operational to meet Tier 4 emissions requirements on regulated job sites. Failing inspections or bypassing filters can result in equipment being pulled from service.

Inspection methods used to evaluate welds, pipelines, and structures without damaging them. Common NDT techniques include ultrasonic, radiographic, and magnetic particle testing. Subcontractors often need certified NDT technicians on crew to meet client and regulatory requirements.

Human-caused ground tremors triggered by oilfield operations like hydraulic fracturing or wastewater disposal. Regulators may issue stop-work orders, directly halting your field operations. Subcontractors should track local seismic thresholds, as exceeding them can suspend permits and delay project timelines.

A workplace danger where a worker's body or clothing becomes trapped, pinched, or pulled into moving machinery, equipment, or materials — common on oilfield and construction sites where subcontractor crews work near rotating equipment, conveyor systems, or heavy moving loads. Subcontractors are responsible for identifying and controlling these hazards through proper guarding, lockout/tagout procedures, and site-specific hazard assessments before work begins.

When a Jobsite Incident Happens: What Field Workers Need to Know Before Signing Anything

What to do after a jobsite injury or incident, what your rights are before signing incident reports, how workers' compensation works, and how to protect yourself on multi-employer worksites.

OSHA Citations on Multi-Employer Worksites: What Subcontractors Need to Know

Learn how OSHA's multi-employer citation policy works, why subcontractors get cited for hazards they didn't create, and how to protect your company on operator-controlled job sites.

How to Read and Negotiate an Oilfield Master Service Agreement (MSA): A Subcontractor's Guide

Learn which MSA clauses actually matter for oilfield subcontractors: indemnity, insurance, payment terms, and change orders. Know what you're signing.