A safety procedure requiring energy sources on equipment to be physically isolated and locked before maintenance work begins. Subcontractors must follow site-specific lockout procedures or risk removal from the worksite. Verify your crew holds valid lockout/tagout certification before mobilising.
Lockout
Related Terms
General Duty Clause
ComplianceA provision in occupational health and safety legislation requiring employers to protect workers from recognised hazards, even when no specific regulation exists. For subcontractors, this means you can be cited for unsafe conditions on site regardless of client-controlled environments. It applies to your workers whether you own the worksite or not.
Near-Miss Reporting
ComplianceThe formal process of documenting incidents where no injury or damage occurred, but easily could have. Subcontractors are typically required to report near-misses to the prime contractor or site owner within a set timeframe. Failure to report can result in contract penalties or disqualification from future work.
Punitive Damages
ComplianceCourt-ordered payments that go beyond compensating actual losses, intended to punish serious misconduct. Subcontractors can face these for gross negligence or wilful safety violations. Many prime contracts include clauses limiting or waiving punitive damage liability.
Customs Broker
ComplianceA licensed intermediary who handles import and export paperwork for equipment and materials crossing international borders. Subcontractors moving tools or machinery into Canada or the U.S. often hire one to avoid costly delays. They ensure duties, tariffs, and compliance documents are filed correctly.
Approved Vendor List
ComplianceA client- or prime contractor-maintained registry of pre-qualified suppliers and subcontractors eligible to bid on work. Getting onto an AVL often requires submitting safety records, insurance, and certifications in advance. Without AVL status, subcontractors are typically blocked from receiving purchase orders or contracts.
Stand Down
ComplianceA directive to halt all work on-site, issued by the prime contractor or owner — most often to address an immediate safety concern or incident. Crews stop billable activities until the issue is resolved and a formal all-clear is issued; depending on contract terms, standby rates may or may not apply. Stand downs can be site-wide or scoped to a specific trade or work area.
Latest Compliance News
OSHA Regulatory Agenda Delays Heat Standard, Advances Tree Care and Lockout Rules
OMB's July 2026 Regulatory Agenda shows OSHA pushing its national heat standard back to a supplemental proposal by December 2026, while advancing tree care, emergency response and lockout/tagout rule changes contractors should track.
4 months agoComplianceOSHA's 2026 Agenda Targets Lockout/Tagout, Heat Rule, Power Presses
OSHA's newly released regulatory agenda sets a November target for a modernized lockout/tagout proposal and a December supplemental notice on the heat rule, while MSHA plans a revised silica proposal for July.
4 months agoComplianceOSHA Dallas Region Administrator Talks Fall Protection, Lockout/Tagout, and Enforcement Direction
OSHA's Eric Harbin, administrator of the Dallas Region, discussed fall protection failures, lockout/tagout compliance, and the agency's current enforcement posture in a new interview with Safety+Health Magazine.
6 months agoComplianceOSHA Lockout/Tagout Rules: What Field Crews Must Know
OSHA's lockout/tagout standard requires employers to control hazardous energy during equipment maintenance. Here's a practical breakdown of the key requirements for field service teams.
7 months agoRelated Guides
When a Jobsite Incident Happens: What Field Workers Need to Know Before Signing Anything
What to do after a jobsite injury or incident, what your rights are before signing incident reports, how workers' compensation works, and how to protect yourself on multi-employer worksites.
Compliance GuideOSHA Citations on Multi-Employer Worksites: What Subcontractors Need to Know
Learn how OSHA's multi-employer citation policy works, why subcontractors get cited for hazards they didn't create, and how to protect your company on operator-controlled job sites.
Compliance GuideHow to Read and Negotiate an Oilfield Master Service Agreement (MSA): A Subcontractor's Guide
Learn which MSA clauses actually matter for oilfield subcontractors: indemnity, insurance, payment terms, and change orders. Know what you're signing.
Stay sharp on field operations
Industry news and insights, delivered to your inbox.
Subscribe to FieldNews
